MAZZULLA MID TRAVEL KIT 2014-2015 CHEVY / GMC 1500 2WD
MAZZULLA MID TRAVEL KIT 2014-2015 CHEVY / GMC 1500 2WD
● 2 upper control arms
● 2 lower control arms
● 8 Delrin bushings
● 8 chromolly shims
● 8 grease zerk fittings
● 2 1" FK uniballs
● 2 uniball cups
● 2 lock rings
● 2 aircraft grade 12 point bolts
● 6 lock nuts
● 4 stover nuts
● 16 washers
● 2 sets of machined uniball spacers (6 pieces total)
● 2 MOOG Performance Ball Joints
● 8 Grade 8 bolts
● 2 braided brakelines
● 2 billet tie rod extensions
● CAD designed and manufactured entirely in the USA
● Superior boxed construction
● Fully MIG welded
● 14" of wheel travel on 2wd trucks
● 11" of wheel travel on 4wd trucks (Axles sold separately)
● 100% bolt on, minor trimming required
● FK teflon lined 1" uniballs
● Billet tie rod extensions
● Machined Delrin bushings
● Grade 8 zinc plated hardware
● 17-4 heat treated stainless steel misalignment spacers
● Counter sunk uniball spacers
● Aircraft grade twelve-point bolts
● Zerk fittings for convenient bushing maintenance
● 2 stage powder coat finish with clear coat
● For use on 2wd and 4wd trucks
Fitment
● This part fits 2wd and 4wd Chevy and GMC 1500 trucks from 2014 to 2015 with coil over
style suspension.
● Trucks with factory aluminum spindles are required to replace them with factory steel spindles
Notes
● Trucks with factory aluminum spindles are required to replace them with factory steel spindles
● Install requires trimming the factory upper arm droop stops
● 4wd trucks require the 4wd Mid Travel Axles (MZS-C5-1)
● Fiberglass fenders are recommended and must be used when running bigger than a 33"tire
● When used with 2wd Lift Spindles (MZS-C2-2) and fiberglass fenders a 37" will clear the firewall